NOTE: The colours shown here are as close to actual paint colours as modern printing techniques allows.Due to different computer monitors/calibrations colours may vary slightly from the picture.

Physical Characteristics:

• Ingredients: modified alkyd resin, mineral extenders, pigments and additives
• Solvent : Mainly aliphatic hydrocarbon
• Density : 0.95-1.20 (kg/litre)
• Solid : Approximately 55%
• Viscosity : 100 –110 sec. (Ford Cup 4 at 27 ± 0.5°C)
• Coverage : 12-14 m2/litre
• Colours : Refer to colour card
• Gloss : Glossy

PROPERTIES:

• Recommended Dry Film Thickness : 25-30 microns per coat
• Drying Time : Touch dry : less or equal to 1 hours
• Hard dry : less or equal to4 hours
• Recoating Interval : > 4 hours

SURFACE PREPARATION:

• Wood Surface
• Metal Surface
• Previously Painted Surface

APPLICATION METHOD:

• Method of Application : Brush, roller or spray application
• Product Preparation : Ready for use after thoroughly stirring. However, if thinning isrequired, not more than10% of mineral turpentine may beadded for brush and roller application; and for sprayapplication up to 15-20% of mineral turpentine may be added.